STM

Schaller STM – high quality roller bridge 

• Compatible with post spacings from 74.0 to 74.5 mm
• Adjustable for height, intonation and string spacing
• Low-friction roller saddles for excellent tuning stability – perfect for Bigsby™* vibratos
• Comes with 2 different type saddle rollers to suit tone and string bending requirements: wide flat rollers for low strings and tight U-shaped for high strings.
• Saddles are made of brass
• Slant angle to be determined by guitarmaker based on scale length and string gauge.

(*Les Paul is a protected trademark of Gibson Brands, Inc. / Bigsby is a registered trademark of Fender® Musical Instruments Corp (FMIC).)

Two models available (please select in the product configurator):

• non-reverse: intonations screws point to the pickups
• reverse: intonations screws point to the tailpiece

Technical specifications

• Distance height adjustment screws: 74 - 74.5 mm
• String spacing (E-e): 48.5 - 57.5 mm
• String spacing individual: 9.7 - 11.5 mm
• String radius: 12″ (rollers set in for narrow/close string spacing) 14″ (rollers set out for wide string spacing); still playable if required for fretboards max. 10 - 16 inches, depending on the setting of the rollers max. inside or outside; minimal G/d string height above body 12.5 mm
• Maximum string gauge: 0.052
• Weight: 58 gram, 90 gram with accessories
• Special feature: also suitable for lefthanded models, but note the built-in angle and position of the intonation screws!

Scope of supply

• 2 x press-in bushings M7
• 2 x height-adjustment screws M5 (metric)

You can find further press-in bushings and height-adjustment screws under » replacement kits for bridges.

PDF file donwload (technical drawing without engagement)

• Schaller STM Roller Bridge 1208