Official Schaller Onlineshop

H

H: Humbucker on the bridge

Download as PDF

Overview

Str_H

H1. Three positions, outer coil, both in series, inner coil, Megaswitch T

H1A

 

H2. Three positions, both parallel, Inner coil, both in series, Megaswitch T

H2A

 

Detail drawing

H1. Three positions, outer coil, both in series, inner coil, Megaswitch T

A Megaswitch can also be installed on guitars which feature a single Humbucker (usually on the bridge). Both coils can be switched individually or in series, for example. The Megaswitch T is ideal for this purpose.

If you have a guitar with two tone controls (type "Stratocaster"), then just leave one unused. 

Switching functions:

H1A

 

Electrical switching principle:  

H1B-19

Wiring diagram:

H1C

Connections:

Positions
1 outer coil
2 humbucker in series
3 inner coil

Connections
1 -
2 ground
3 hot wire inner coil and output
4 hot wire outer coil and cold wire inner coil
5 -
6 -
7 -
8-
ground: 2, cold wire outer coil

__________

H2. Three positions, both parallel, Inner coil, both in series, Megaswitch T

This switching system for guitars with a single Humbucker makes the following possible; parallel switching of both coils, single coil mode and switching in series. The Megaswitch T is ideal for this purpose.

If you have a guitar with two tone controls (type "Stratocaster"), then just leave one unused.

Switching functions:

H2A

 

Electrical switching principle:  

H2B-19

Wiring diagram:

H2C

Connections:

Positions
1 humbucker parallel
2 outer coil
3 humbucker in series

Connections
1 to 3, ground
2 to 6
3 to 1, ground
4 cold wire inner coil
5 -
6 to 2
7 hot wire inner coil and output
8 hot wire outer coil
ground: 1, 3, cold wire outer coil

__________

 

Viewed