Official Schaller Onlineshop

M6 Mini

M6 Mini
From €16.20 *

Prices incl. 19% VAT (only European Union) plus shipping costs

Surface:

Model:

Buttons:

Posts:

Info to posts with images
We hereby declare that cancellation law shall not apply to contracts pertaining to the delivery of goods which are not ready-made like these, nor shall it apply to products which are manufactured according to the customers express wishes or specially adapted to the personal needs of the consumer and single tuners.
I have read and understood the information/ links in red and I know what a left and a right machine head/tuner is and I know that the length of the post is measured according to the pictures shown here from the bottom of the housing to the center of the hole for the strings.
Reset selection
  • 10040120.01.20
Smaller and lighter version for Stratocaster™* models, small headstocks or 12-string guitars.... more

Smaller and lighter version for Stratocaster™* models, small headstocks or 12-string guitars.

The perfect functionality of the M6 model, combined with the smaller and lighter design with a higher gear ratio 1:18. (*Stratocaster is a protected trademark owned by Fender Musical Instruments Corporation).

All sealed tuners are lubricated with Schaller special grease for lifetime maintenance-free service.

All parts are precision-crafted and surface-finished, the self-locking drive ensures an even, delicate and steady tuning.

All string posts are made of high-grade brass and fitted into the housing with utmost precision, ensuring the best possible tuning accuracy and wear resistance.

 

Instructions Toplocking screw

  • Unscrew the knurled screw on the adjusting axis anti-clockwise until the clamping ball comes off.
  • Now press the strings against the clamping ball. Under pressure, it recedes. You can now put the guitar string through the adjusting axis.
  • Screw the knurled screw clockwise until it is hand tight. The string is now secured by the clamping ball.
  • Now you can tune your strings.
  • Now featuring a metric thread and a specially developed screw locking device, so you don`t lose the screw anymore!
  • When loosening the screws, turn them anticlockwise until the string is tightened into position.
  • When removing the connecing screws completely  from the shafts, simply take the connecting screw out of the shaft at threshold resistance. 
  • The Schaller M6 Toplocking with fine pitch thread and pull-off locking screw
  • Fine Pitch Thread for better locking adjustment
  • Our new Toplocking screw with fine pitch thread allows the screw to be turned more precisely and the locking torque to be adjusted more accurately.
  • New pull-off mechanism that makes pulling off as easy as putting back on
  • To prevent the toplocking screw from coming off and getting lost in the process of string changing we designed a new mechanism keeping the loosened screw in place even when it is completely unfastened.
  • To remove the Toplocking screw entirely from the string post just pull it off firmly. To put the screw back on just turn clockwise and tighten lightly.

 

technical specification

gear ratio 1:18, weight 31g (Toplocking 37g) per piece, drill hole button: diameter 4.2 mm with driving surface 3.6 mm

 

scope of supply

6 threaded bushings, 6 step washers, 6 mounting screws

 

technical drawings (without engagement)

Our technical drawings show just a sample of buttons and posts. You`ll find the technical details of our posts by using the configurator chapter „posts“.

TZ_1004TZ_1101 and TZ_1102 (pdf-files)

TZ_1004

TZ_1101 

TZ_1102 

Viewed