Megaswitch P
You can use Megaswitch P for the following switching positions:
HH9
With this switching type, a combination of coils is obtainable which some PRS guitars produce using a rotary switch:
- bridge Humbucker
- outer coils parallel
- inner coils in series
- inner coils parallel
- neck Humbucker
The Megaswitch P was specially developed for this purpose. Whereby all positions are meant to be buzz-free, the magnetic polarity of the coils must be NS-NS or SN-SN. This is the case on PRS guitars; here the neck and bridge pickups are poled differently from a magnetic perspective. In the event that in standard types the screw side should be the outer one and that buzz-free sound is required in all positions, the magnet in one of the two pickups must be turned.
Connections:
Positions
1 bridge humbucker
2 outer coils parallel
3 inner coils in series
4 inner coils parallel
5 neck humbucker
Connections
1 neck hot wire inner coil and cold wire outer coil
2 output
3 bridge hot wire outer coil and cold wire inner coil
4 bridge cold wire outer coil
5 neck cold wire inner coil, ground
6 neck hot wire outer coil
7 bridge hot wire inner coil
ground: 5, neck cold wire inner coil
__________