Schaller Tremolo Locking Nut right R2 (41.4 mm)

• Tremolo locking nut complete with mounting screws from top and rear with nut clamping blocks.
• Matching locking nut for our tremolos Lockmeister and Schaller Tremolo.
• The strings sit just as firmly, but there are no sharp edges that could potentially cause string breakage.
• Suitable for all common string gauges.
• Locking nut width: 41.4 mm
• Available in radii: 8", 10", 12", 14" and 16"

Scope of supply

• 1 x Locking nut with mounting accessories as shown in the product image at the top.

We deliver both wood screws and steel/inside hexagon screws with the tremolos and nuts, so that you can fasten the nuts on the fingerboard from below as well as from above, according to your own choice.
The nuts are already prepared so that you can use wood or steel screws without further processing.

For reasons of simplification, we only show the picture in nickel for the replacement kits. Please select the desired color using the configurator. You will then receive the desired product in this selected color, even if the product is only shown as nickel in the picture.

PDF file download (technical drawings without engagement)

• Schaller Locking Nut Klemmsattel R2 1312