Schaller adopts KTS Titanium saddles on their guitar bridges

Megaswitch rotary 3- and 5-way for a wide range of circuit variations The same applies to the Megaswitch rotary switch: get more out of your instrument's pickup combinations. Pickups, i.e. single coils with one magnetic coil or humbuckers with two single coils, can be connected in many different ways. This opens up a wide range of sound combinations in electrically amplified instruments such as electric guitars or electric basses, which are equipped with several pickups. Whether parallel, series connection or out-of-phase, we offer the Megaswitch toggle and rotary switch types E, E+, S+T, P and M. What is the difference between the Schaller Megaswitch rotary and the regular Megaswitch? rotary switch instead of toggle switch The switch housing with circuit board is designed for horizontal installation in the body. available types: 5-way (E, E+, S+T, P and M) and 3-way (S+T)Learn more about the Megaswitch 3- and 5-way toggle Special features sturdy metal housing high-strength moving parts gold-plated conductors on the circuit board, which guarantee perfect sound transmission precise engagement in all switch positions optimal function and a long lifetime Schaller Megaswitch wiring and assignment diagramsFurther information on the switch types "E, E+, S+T, P and M" can be found in our guide Megaswitch rotary and toggle. Examples of circuit diagrams with a Megaswitch rotary: two humbuckers, 4 pots » HH4P three humbuckers, 4 pots » HHH4P Technical specifications weight: approx. 36 g printed circuit board: 46 x 28 mm size metal case: 34,4 x 23 mm Diameter potentiometer axis: 6 mm, with slotted knurled knob mount Mounting: M8 thread Overall size (W x H x D): 46 x 30 x 34.8 mm (37 mm incl. washer and PCB screw head) Scope of delivery 1 x Megaswitch rotary switch 2 x hexagon nuts 1 x washer 1 x toothed lock washer(Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)

Megaswitch for guitar and bass: 3- and 5-way for a wide range of circuit variations Get more out of your guitar's pickup combinations. Pickups such as singles coils (one magnetic coil) and/or humbuckers (with two individual coils) can be interconnected in different ways. This opens up a wide variety of sound combinations in electrically amplified instruments such as electric guitars or electric basses equipped with multiple pickups. Whether parallel, series connection or out-of-phase, we offer the following variety of Megaswitch toggle and rotary types like E, E+, S+T, P or M. Only the best materials for our production sturdy metal housing high-strength and movable parts gold-plated conductor tracks on the circuit board, which guarantee perfect sound transmission precise engagement in all switch positions optimal function for a long life Additional information on switching- and circuit-diagrams can be found in the following operating instructions for Megaswitch Guitar and Megaswitch Bass. Technical specifications Weight: 34 g Button size: 3.6 x 1.4 mm Dimension (w x h x d): 48 x 54.4 x 15.1 mm Distance between mounting screws Control Plate: 40.7 mm Socket housing depth without switch: 30 mm Scope of delivery includes a black switch knobScope of supply 1 x Megaswitch (type according to your selection in the product configurator) 2 x mounting screws M3 x 10(Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)

Schaller LockMeister® 6 Tremolo – beyond your expectations     Since its debut in 2012, the Schaller LockMeister® became the most advanced locking tremolo: 100 % Made in Germany – designed, engineered, and manufactured. Now we present the first double-locking tremolo that allows individual adjustment to different fretboards, whether straight or compound radius! Our famous Schaller "S", our logo on the back of the base plate, guarantees you 100% Made in Germany. The new LockMeister system can now be adapted to different fingerboard radii. While locking nuts (R2/R3) were previously only available with 10″ and tremolos with 12″, there are now 5 different locking nut radii and 4 different tremolo radii to choose from.   (Fig. 1: Schaller GmbH) The flowing transition from a strongly curved fingerboard in the lower registers to a flatter radius in the higher registers can now be realized exclusively with the new LockMeister system. LockMeister® 6 pitch perfect triple feature – choose between: 4 x LockMeister Tremolos with fixed bridge radii: 10″, 12″, 14″ and 16″ (Fig. 2: Schaller GmbH) 5 x LockMeister Locking Nuts: 8″, 10″, 12″, 14″ and 16″ (Fig. 3: Schaller GmbH) Also new: extended fine-tuner screws for a wider tuning range!The extended thread length of the M5 x 10 fine tuning screw (instead of M5 x 8) with its flat threaded tip also enables a wider tuning range. (Fig. 4: Schaller GmbH) Pitch perfect features – only available for LockMeister® 6 New height-adjusted one-piece string saddles: no more shims needed between saddle and baseplate. Fully closed string saddles on the bottom for optimum hold and contact to the baseplate: falling out saddle cover plates are history. The extended thread length of the fine-tuner screw delivers a wider tuning range. Improved locking nut and tailpiece shapes with a greater variety of radii. For longer playing time without retuning  Technical specifications Baseplate, saddles and locking nut from hardened steel Distance height adjustment screws: 74.3 mm according to international standards (sometimes only 74mm, it is identical) Size press-in bushing: 10 mm String spacing E-e: 54 mm Slideway intonation 8.5 mm Weight: 442 g with block length 37 mmWeight only Tremoloblock: 32mm (101 g), 37mm (119 g), 42mm (135g) Maximum string gauge: 0.080" / 2,03 mm Tremolo radii: 10", 12", 14" and 16" Tremolo block: with 3 fixing screws at a distance of 17 mm, material brass. Locking nut radii 8″, 10″, 12″, 14″ and 16″, in widths R2 (41.4 mm) und R3 (42.9 mm) The bottom of the saddles are marked with dots like a dice. They are mounted on the baseplate from the outside to the inside with increasing numerical values, from which the radius results. There is always no dot on the outside for the E/e string saddles. The strings A/b, for example, could have one dot and the two inner saddles D/G two dots. The extended thread length of the fine-tuner screw delivers a wider tuning range.  Scope of supply 1 x locking nut complete with 2 pairs of mounting screws 1 x string retainer with mounting screws 2.2 x 16 mm 1 x tremolo claw complete with mounting screws 4.2 x 45 mm and 3 tremolo springs 2 x mounting studs M7 x 0,5 with 2 threaded bushings diameter 10 mm 3 x allen keys (2.0/2.5/3.0 mm) 1 Tremoloblock according to selected length Together with the 5 new locking nut radii, it can now be customized on different fingerboards. Whether straight or compound radius, with a total of 14 combinations, the new LockMeister system offers a wide range of possibilities. This ensures better playability and more fun while playing the guitar.   Every single part is manufactured with the highest precision at Schaller on CNC machines, for brilliant and precise surfaces and a long service life!Please note when changing from Schaller tremolo to LockMeister 6:If you want to change from a Schaller tremolo (with zinc baseplate) to a LockMeister 6 (made of steel) on a guitar, please check in advance whether shorter M4x34 string locking screws are required for LockMeister 6. The body routing for a Schaller tremolo may be smaller than for the LockMeister 6 with 40 mm string locking screws due to the design. The routing does not have to be extended for this, we offer shorter 34 mm string clamping screws that compensate the difference.See further accessories under replacement kits for tremolos. About guitar neck profiles and playability The neck profile, your own hand, and the fretboard radius determine comfort and playability. A rounder fingerboard conforms more to the natural curvature of the fingers, which is ideal for playing in lower registers, such as chords and barré grips. A flat radius provides a more even playing surface, ideal for bending and faster vertical playing in higher registers, which is often preferred for solos. Operating Instructions (Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)

Special stop tailpiece for our STM and GTM bridgesThis tailpiece is usually installed straight (i.e. parallel to the frets) on the body of a guitar.Suitable for the following bridges:STM roller bridgeGTM with brass saddlesGTM with titanium saddles Technical specifications Distance height adjustment screws: 81 mm String spacing (E-e): 51.5 mm String radius: 12″, usable for fretboards from 10 to 14 inch Maximum string gauge: 80 Weight: 78 gram, 122 gram with accessories Special feature: also suitable for left-handed models Scope of supply 1 x stop tailpiece2 x press-in bushings 5/16 inch 24 UNF 2 x height-adjustment screws 5/16 inch 24 UNF You can find further press-in bushings and height-adjustment screws under replacement kits for bridges.(Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)

Not "Like the original", but the original! Original look and specs with cutting-edge Schaller technology. Exact vintage style replacement machine heads for Fender guitars with original dimensions in tried-and-tested Schaller quality. With splitted posts for easy string wrapping. Please note The housing cover is the same for the left and right machine heads: see the two additional images in the product illustrations at the top left, labeled “left/links” and “rechts/right”. These tuning machine heads do not cover the "footprint" that the original tuners originally left on all guitars. Technical specifications Gear ratio: 1:14 Weight: 22 g each single tunerdistance between the posts 23,8mm Scope of supply 6 x press in bushings 12 x mounting screws: M2.2 x 9.5 Optional accessories can be found under replacement kits for machine heads. (Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)

Original G-Series Deluxe KeyStone with new 1:18 gear ratio Most common tuning pegs feature a lower gear ratio of 1:14 or 1:16, which was a standard for a long time. The introduction of the 1:18 ratio in our Schaller GrandTune and improved M6 series, has now also found its way into the classic Original G-Series Deluxe KeyStone. The higher gear ratio of 1:18 ensures a precise and velvety smooth tuning process. An investment in your guitar to improve tuning accuracy that should not be underestimated. They feature vintage original specs along with that classic look and feel: designed to match contemporary as well as historic guitar styles. Replacement machine head with 2-screws and a banjo bolt as counterfort. Available in single-ring (SR) and double-ring versions (DR). All sealed tuners are lubricated with Schaller special grease for lifetime maintenance-free service. All parts are precision-crafted and surface-finished, the self-locking drive ensures an even, delicate and steady tuning. All string posts are made of high-grade brass and fitted into the housing with utmost precision, ensuring the best possible tuning accuracy and wear resistance. Gear to the button made of brightly polished stainless steel so that the gear drive runs better and longer. Instructions for toplocking screw Unscrew the knurled screw on the adjusting axis anti-clockwise until the clamping ball comes off. Now press the strings against the clamping ball. Under pressure, it recedes. You can now put the guitar string through the adjusting axis. Screw the knurled screw clockwise until it is hand tight. The string is now secured by the clamping ball. Now you can tune your strings. Now featuring a metric thread and a specially developed screw locking device, so you don`t lose the screw anymore! When loosening the screws, turn them anticlockwise until the string is tightened into position. When removing the connecing screws completely  from the shafts, simply take the connecting screw out of the shaft at threshold resistance.  The Schaller Toplocking with fine pitch thread and pull-off locking screw. Fine Pitch Thread for better locking adjustment. Our new Toplocking screw with fine pitch thread allows the screw to be turned more precisely and the locking torque to be adjusted more accurately. New pull-off mechanism that makes pulling off as easy as putting back on To prevent the toplocking screw from coming off and getting lost in the process of string changing we designed a new mechanism keeping the loosened screw in place even when it is completely unfastened. To remove the Toplocking screw entirely from the string post just pull it off firmly. To put the screw back on just turn clockwise and tighten lightly. Technical specifications Gear ratio: 1:18 Post-lenghts: 19.7, 21.7, 23.7 mm and TopLocking with 19.7 mm   Weight: 32 gram (DR/Toplocking), 31 gram (SR/Toplocking), 29 gram (DR, solid 21,7), 28 gram (SR/solid 21,7) per single tuner Scope of supply 6 x threaded bushings 6 x step washers 12 x mounting screws: M2.2 x 9.5 (Technical drawing without engagement. It shows only a sample of buttons and posts. You`ll find the technical details of our posts by using the configurator chapter „posts“.)(Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)

Elegance and lightness for electric basses Experience the lighter side of heavy duty. The M4 180 light tuning machine for electric basses - legendary Schaller quality at a stunning 40% less weight. Its specs, looks and superior performance define this tuner as a true no-compromise when it comes to weight reduction. A special female screw guarantees precise positioning and fixing of the shaft. High gear ratio of 1:20 ensures a very precise tuning. All sealed tuners are lubricated with Schaller special grease for lifetime maintenance-free service. All parts are precision-crafted and surface-finished, the self-locking drive ensures an even, delicate and steady tuning. All string posts are made of high-grade brass and fitted into the housing with utmost precision, ensuring the best possible tuning accuracy and wear resistance. Technical specifications Gear ratio: 1:20 Weight: 52 g per piece Screw lug: 180 degree Scope of supply 4 x threaded bushings 4 x washers 4 x mounting screws: M2.2 x 9.5(Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)

Set of S-Locks size S With strap lock buttons in a thread length of 18 mm. With Schaller Security Locks, we developed and patented a completely new product in 1981, probably the most secure connection between guitar and strap. In 2018, the next generation was introduced with the S-Locks.Note: before installation please read the followingS-Locks user guide Concept and features S for safe, silent & Schaller strap locksIn the development of the new revolutionary S-Locks we have combined 3 parts to perfection: unique one-piece hardened steel strap buttonsS-Locks suitable for different belt thickness with ergonomic operationand a patented locking nut - Lock-Wheel - with triple security architecture (Fig. 1: one set of S-Locks complete with strap button)The S-Locks strap buttonnew and unique one-piece construction, easy to install via 3 mm (1/8") allen keyspecial 3.5 mm wood thread in S-Lock size S for maximum grip. Optionally available in sizes M (4.0 mm) and L (4.5 mm). Please refer to the installation guide above.hardest steel for maximum wear resistance and safety including high-grade felt washers to protect your instrumentThe S-Locks improved lockextended thread length for holding straps of up to 6 mm thicknessnewly designed slanted locking bolt made of stainless steel for minimum wear and thus maximum safetynew design pull-up ball for best hapticssuitable for a standard hole in the belt of 10 mmThe improved S-Locks-Wheel: featuring 3-stage safety concept Lock-Wheel with special patent thread ensures a secure hold. It can be tightened safely by hand without tools.The 2-hole mount (suitable for 2 mm Allen key or screwdriver) allows a firmer tightening torque of the Lock-Wheel with maximum hold.Undetachable hold due to grub screw with tapered cap and slot 2.5 x 5 mm made of stainless steel. Simply unscrew the set screw again to unscrew the Lock-Wheel; the thread remains functional and cuts itself "free" again through the Lock-Wheel.FinalPut all parts together and give it a shakeSounds of silence - You will be amazed: Whether on stage or in the studio, S-Locks do not rattle. Compatibility Schaller Security Locks and S-Locks a.) S-Locks are compatible with all existing Schaller Security Locks like this: strap button old SecLock + lock new S-Lock (without silent feature!) strap button new S-Lock + lock old SecLock only limited, we do not recommend it. Please always use our new S-Lock lock with Lock-Wheel on your strap, then you will always be compatible with all strap buttons and at the same time you will always use all the advantages of our new Lock-Wheel. Please always make sure that the lock is engaged in the strap button, the lock is attached to the belt in such a way that the strap button is secured in the U-shape of the lock and that the instrument does not rotate. b.) One strap for several instruments Choose from more matching strap buttons in different lengths here:Strap Buttons size S: male thread 3.5 mm, inside 2.4 mm, length 18 mmStrap Buttons size M: male 4.0 mm, inside 3.0 mm, length 22 mm - most commonly usedStrap Button size L: male 4.5 mm, inside 3.2 mm, length 27 mm Scope of delivery: 2 x Strap Buttons with high-grade felt washers   2 x Locks    2x Lock-Wheels  (Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.) S-Lock Size M 1401    

Schaller LockMeister 6 left-hand tremolo – beyond your expectations  As the sole manufacturer of the world‘s most renowned double locking tremolo we felt it was time to push the envelope. Proudly introducing the new Schaller LockMeister tremolo! Along with Schaller‘s famed precision the new LockMeister tremolo offers a second to none C45-steel ground plate, forged and hardened in Germany, resulting in improved sound and sustain as well as superior tremolo performance and intonation. Our famous Schaller "S", our logo on the back of the base plate, guarantees you 100% Made in Germany.New technologies enabled us to craft all components in unprecedented tolerances giving the Schaller LockMeister-Tremolo a sublime level of workmanship and longterm quality. But our attention to detail did not stop here. Performing meticulous assessments made us identify the perfect choice of pivot screws and tremolo springs. Through more rigorous testing we learned how all burnished surfaces were prone to corrosion. That‘s why all studs, inserts and screws of our new Schaller LockMeister™ Tremolo now feature black-zinc and black-chrome finishes for improved look, touch and durability. All this resulting in our world famous Schaller longevity. Tremolo mounting is done with special mounting studs and threaded metric inserts. These are provided with a fine thread. Optionally, we also offer height adjustable wood screws for direct mounting into the wooden body. In this case, the insert is not required. The dimensions of our LockMeister are exactly the same as the dimensions of the Floyd Rose tremolo. You can easily replace your Floyd Rose tremolo with our new LockMeister tremolo. This also applies to all replacement parts! You can use an EVH D-Tuna. New height-adjusted one-piece string saddles for 12" tremolo-radius: no more shims needed between saddle and baseplate. Fully closed string saddles on the bottom for optimum hold and contact to the baseplate: falling out saddle cover plates are history. The extended thread length of the M5 x 10 fine tuning screw (instead of M5 x 8) with its flat threaded tip also enables a wider tuning range.Please note when changing from Schaller tremolo to LockMeister 6:If you want to change from a Schaller tremolo with zinc baseplate (left-hand version no longer available) to a LockMeister 6 left (made of steel) on a guitar, please check in advance whether shorter M4x34 string locking screws are required for LockMeister 6. The body routing for a Schaller tremolo may be smaller than for the LockMeister 6 with 40 mm string locking screws due to the design. The routing does not have to be extended for this, we offer shorter 34 mm string clamping screws that compensate the difference. See further accessories under replacement kits for tremolos. Technical specifications Baseplate, saddles and locking nut from hardened steel Distance height adjustment screws: 74.3 mm according to international standards (sometimes only 74 mm, it is identical) Size press-in bushing: 10 mm String spacing (E-e): 54 mm Slideway intonation 8.5 mm Weight : 442 g with block length 37 mmWeight only Tremoloblock: 32mm: 101g, 37mm: 119g, 42mm: 135gMaximum string gauge: .080 Tremolo radius of the saddles: 12", 1 x set consisting of 6 string saddles for the string positions E, A, D, g, b(h) and e. The heights of the saddles are adapted to the selected radius! Tremolo block made of Pure Sound brass: available in three block lengths 32, 37 and 42 mm (please select the desired length in the configurator). The block ist attached using 3 fixing screws at a distance of 17 mm. The saddles are marked with dots. The saddles are mounted on the baseplate from the outside with increasing numerical values to the inside. The saddles outside for the E and e-strings have no dot. For example, the strings A and h could have one dot and the two inner saddles D + G two dots.Scope of supply1 x locking nut with 10" radius. Please select the appropriate width L2 (41,4 mm) or L3 (42,9 mm) in the configurator. Mounting is carried out using 2 pairs of different screws included in the scope of delivery.1 x string retainer with mounting screws 2.2 x 16 mm 1 x tremolo claw complete with mounting screws 4.2 x 45 mm and 3 tremolo springs 2 x mounting studs M7 x 0.5 with 2 threaded bushings diameter 10 mm 3 x Allen keys (2.0/2.5/3.0 mm) 1 x Tremoloblock according to selected length (see configurator) Operating Instructions (Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)

SureClaw – the patented tremolo spring tensioner for electric guitars! Developed for guitarists who use a spring-loaded tremolo with tremolo block on their electric guitar, such as those fitted to Fender Stratocaster*, LockMeister or Floyd Rose guitars*. The Schaller Sure Claw allows quick and easy adjustment and fixing of the correct spring tension without having to remove the cover plate. (* Fender® and Stratocaster® are registered trademarks of Fender Musical Instruments Corporation. / Floyd Rose® is a registered trademark of Floyd Rose Marketing.) The most important features at a glance Simple horizontal mounting with two screws Easy to adjust thanks to worm drive Simultaneous parallel adjustment of the spring claw by means of worm drive Easy readjustment with an Allen key through the closed cover plate of the tremolo chamber. Eliminates problems such as: Extra long drill holes in the guitar body Excessive force and worn screw heads of the fastening screws due to jammed screwdrivers Risk of injury and damage to the guitar Constant tedious mounting and dismounting of the spring chamber cover Technical specifications  Weight: 94 g Holds up to three tremolo springs Dimension (WxDxH): 52 x 14.4 x 42 mm Scope of delivery 2 x mounting screws M3.5 x 25 mm (shorten if necessary) 1 x pin for anchoring 1 x Allen key 3 mm The difference: Schaller Sure Claw vs Vintage Tremolo Claw The Vintage Tremolo Claw Vintage tremolo claws made of bent sheet metal are usually mounted in the body wall using two long wood screws, creating a floating suspension. The spring preload can be changed via the screw-in depth. If the screws are too long, this can lead to damage to the pickup via the screw-in depth, for example. Regular readjustment increasingly damages the bolt head and widens the bolt hole. Crooked threads can lead to a gap between left and right springs with uneven loading: The Vintage Claw then no longer sits parallel and the strings go out of tune when the tremolo is operated. The Schaller Sure Claw The Sure Claw is simply mounted flush and parallel in the tremolo compartment using two fixing screws, which guarantees an absolutely firm connection to the body. Up to three tremolo springs can be attached to the claw to create the connection to the tremolo. The spring preload is adjusted via two worm threads running precisely in the Sure Claw using a 3 mm Allen key (included). An additional hole in the cover plate allows immediate adjustment without additional assembly work. The claw is made of steel, brass and zinc. Once fitted, this rock-solid connection helps to improve tuning stability and at the same time supports the sustain of the electric guitar. Tips for installing a Schaller Sure Claw Before mounting, check the wall thickness between the spring chamber (back of the body) and the top (front of the body), as this can vary depending on the manufacturer. The mounting screws point towards the guitar top. If there is no drill hole yet, drill it depending on the wood used and observe the correct depth to avoid drilling through the top or top routings. If necessary, use a shorter mounting screw such as the 25 mm supplied (or shorten it). For earthing, strip an earth cable coming from the bridge, fan out the stranded wire and position it between the base plate of the Sure Claw and the body wood.  Now screw the Sure Claw to the base of the spring chamber, tightening it will connect the earth cable. This creates a secure and permanent ground connection. Where should the fine adjustment hole for the hexagon socket be drilled in the cover plate? To enable you to drill the correct hole for inserting the hexagon socket, the Claw comes with a mandrel as a marking aid. First insert the spike with the tip pointing upwards into the hexagon socket of the assembled claw. Now place the cover plate precisely on the mounting points of the tremolo chamber of the body base. As soon as you tighten the fixing screws slightly, the mandrel will center the correct position for the drill hole in the body cover. Then remove the mandrel. drill the marked hole at the cover marking to insert the 3 mm Allen key. now close the cover and your Claw is ready for use. The spring preload can now be easily adjusted from the outside through the hole with the hexagon socket, without any additional assembly work.(Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)

Vintage Tremolo with roller saddles The baseplate of hardened steel and the solid spring block of the Schaller Vintage Tremolo ensures an outstanding sustain. The Roller bridge saddles fix the strings in their optimum position. It is also a perfect replacement for Fender® Stratocaster®* tremolos with standard 74.3 mm (equivalent to the distance between the height adjustment screws). Tremolo mounting is done with special mounting studs and threaded metric inserts. These are provided with a fine thread. Optionally, we also offer height-adjustable wood screws for direct mounting into the wooden body. In this case, the insert is not required. (* Fender® and Stratocaster® are registered trademarks of Fender Musical Instruments Corporation.) Technical specifications Distance height adjustment screws: 74.3 mm Size press-in bushing: 10 mm String spacing (E-e): 54 mm Slideway intonation: 12.0 mm Weight: 327 g with block length 37 mm Maximum string gauge: .095 Scope of supply 1 x Tremolo claw complete with 2 mounting screws 4.2 x 45 mm and 3 tremolo springs 2 x Mounting studs with 2 threaded bushings 1 x Tremoloblock according to selected length PDF file download (technical drawing without engagement) Schaller Vintage Tremolo system for electric guitar 1305    

Schaller S-Locks Classic set Strap lock buttons without fastening screws. With Schaller Security Locks, we developed and patented a completely new product in 1981, probably the most secure connection between guitar and strap.In contrast to our regular S-Lock range, where the strap pin and fastening screw are made of steel in one piece, the S-Lock Classic is the perforated strap pin sleeve, which is fastened via a separate fastening wood screw (not included in scope of delivery).Both versions offer Schaller's proven quality for securely fastening the strap to instruments such as guitars or basses. Note: Please read our S-Locks user guide before !installation.     S-Locks: 3 x S for Safe Silent & Schaller strap locks Concept and features In the development of the new revolutionary S-Locks we have combined 3 parts to perfection: unique hardened steel strap buttons S-Locks suitable for different belt thickness with ergonomic operation and a patented locking nut - Lock-Wheel - with triple security architecture. Schaller S-Lock Classic set consisting of:   2 x S-Lock Classic strap buttons (without fastening screws) made of the hardest steel for maximum wear resistance and safety including high-quality felt washers to protect the instrument Dimensions strap buttos same as original security locks: Height: 10mm; Diameter outside: 12mm; Diameter max. for screw head: 6.8mm; Diameter hole for screw: 3.8mm These are easy to install using a suitable wood screw (not included in scope of delivery).Detailed assembly instructions can be found in this product description below. 2 x Locks for S-Locks extended thread length for holding straps of up to 6 mm thickness, newly designed slanted locking bolt made of stainless steel for minimum wear and thus maximum safety new design pull-up ball for best haptics suitable for a standard hole in the belt of 10 mm 2 x S-Lock-Wheels Lock-Wheel with special patent thread ensures a secure hold. It can be tightened safely by hand without tools. The 2-hole mount (suitable for 2 mm Allen key or screwdriver) allows a firmer tightening torque of the Lock-Wheel with maximum hold. Undetachable hold due to grub screw with tapered cap and slot 2.5 x 5 mm made of stainless steel. Simply unscrew the set screw again to unscrew the Lock-Wheel; the thread remains functional and cuts itself "free" again through the Lock-Wheel. Compatibility Schaller Security Locks and S-Locks S-Locks are compatible with all existing Schaller Security Locks like this: strap button old SecLock/S-Lock Classic + lock new S-Lock (without silent feature!) strap button new S-Lock + lock old SecLock (only limited, we do not recommend it!) » Please always use our new Locks for S-Locks with Lock-Wheels for S-Locks on your strap, then you will always be compatible with all strap buttons and at the same time you will always use all the advantages of our new Lock-Wheel. » Please always make sure that the lock is engaged in the strap button, the lock is attached to the belt in such a way that the strap button is secured in the U-shape of the lock and that the instrument does not rotate. (Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.) PDF follows  

Buttons size M: 22 mm for S-Locks   Scope of supply 2 x buttons size M (4.0 x 22 mm), standard size including felt washers (Please use the configurator. You will then receive the desired product in that selected color.) Special The S-Locks "Silent Feature": No more rattling in combination with S-Locks Strap Buttons, Locks and Lock-Wheels. The S-Locks new strap button    new and unique one-piece construction, easy to install via 3 mm (1/8") Allen key. special 4 mm wood thread in S-Lock size M for maximum grip. Optionally available in sizes S (3.5 mm) and L (4.5 mm). Please refer to the installation instructions in the description below for size specifications. hardest steel for maximum wear resistance and safety including high-grade felt washers to protect your instrument One strap for several instruments Choose from more matching strap buttons in different lengths here: Strap Buttons size S: male thread 3.5 mm, inside 2.4 mm, length 18 mmStrap Button size L: male 4.5 mm, inside 3.2 mm, length 27 mm We recommend choosing the strap button first to match the size of the existing hole in the guitar.  If the hole is too big or too small, please choose a different strap button or reduce, close, re-drill or extend the hole. If necessary, countersink separately in the area of the outer lacquer layer to prevent the lacquer from flaking off when screwing in the strap button. Carefully screw in the strap button into the wood and, if it is too tight, unscrew it again and gradually drill up the drill hole. If the strap button is too easy to screw in, then reduce or close the hole and drill again appropriately. Tighten the strap button "hand-tight" to the instrument body. Do not continue by force. The wood may break, flake off the paint and tear off the strap button. » Please check the secure fit of the strap button in the wood regularly and retighten the screw if necessary or reduce or close an enlarged hole as described and re-drill.(Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)

Switch Knob for Megaswitch: accessories Color matching knob for your guitar hardware Technical specifications Slot size: 3,6 mm x 1,4 mm Height: 15,8 mm Width: 8,9 mm Surface colors: Nickel, Chrome, SatinChrome, Gold, Ruthenium, SatinPearl, Black und White Scope of delivery 2 x knobs

GrandTune Classic Hauser: without guide bushings With the Schaller GrandTune  we have created the ultimate combination of stylish vintage design, accurate tuning and velvety smooth performance. A perfected, classic tuning machine for guitars, as open-gear tuner.Its 1:18 gear ratio offers unsurpassed precision and durability. The avoidance of synthetic coatings makes it a perfectly resonant unit on any instrument. With its wear-free interaction it will shine and sound as long as your finest guitars. Experience for yourself how sound quality, tuning stability and performance find unity in these machine heads. Special features 1:18 gear ratio supports precise and velvet- smooth tuning. Hyper- accurate gear joints and fittings without polymer coatings present perfect stick-slip-performance and zero wear and slackening. GrandTune features permanently locked, sealed and covered screw joints for zero degradation and maintainance-free performance. New formula bell brass gearwheels guarantee velvet-smooth feel and touch Standard dimensions for easy installation. Countersunk screw holes for solid fit and perfect sound coupling. GrandTune Classic Hauser – without guide bushings – in detail The Classic Hauser model impresses with its simple elegance without engravingsNot only connoisseurs of high-quality classical guitars appreciate its carefully tuned gear torque. High-gloss string rollers Without 10 mm guide bushings: the base plate is smooth on the back, see additional image in the product preview. The Classic Hauser model without guide bushings is only available with 6 mm posts (and a central tuning peg hole) for slotted headstock, see product configurator: post for slotted headstock 14,65. The GTC Hauser without guide bushings is mainly intended for existing headstocks with through holes of 6 mm, which are often found on vintage instruments and which do not require drilling out to 10 mm.  Technical specifications Gear ratio: 1:18 Weight per baseplate: 75 g (Snakewood), 81 g (Perloid white square, Ebony square), 82 g (Polybone oval, Acrylic black ellipse) Scope of supply 8 x mounting screws: M2.2 x 11No bushings are required for slotted headstock GT-models (they are not included in the scope of delivery)! You can find optional bushings here: replacement kits for machine heads. The indicated price refers to a whole set consisting of a right and a left baseplate with three tuners each. See also our other GrandTune designs with 10 mm guide bushings here: Classic Hauser with 10 mm guide bushings Classic Lyra with 10 mm guide bushings (These models offer an additional variety of axes with and without ball bearings) PDF file downloads GrandTune Classic Hauser GrandTune Classic Buttons GrandTune user guide (Technical drawings without engagement. Our technical drawings show just a sample of buttons and posts. You`ll find the technical details of our posts by using the configurator chapter „posts“.) (Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)   User guide

Schaller Hannes 6-string bridge: for guitars with fingerboard radii from 9.5 to 20 inches! A splendid fusion of innovation and tone in top quality - straightforward and noble. by far the most comfortable bridge on the market; the perfect blend of the acoustic properties of all current bridge designs; impresses with detailed highs, fast attack and a well-defined, powerful and harmonic sound; touch-friendly material and smooth surface with no edges; wear-free by waiving of metallic coatings at the string contact points; fresh, but unobtrusive look which gives the guitar design still a more noble appearance.stainless steel screws for extra durability Special features The Schaller Hannes bridge is a flat mount bridge designed for solid body electric guitars. The top must be flat in the area of the mounting surface for the bridge; this must be taken into account for carved tops.The Hannes saddles are made of our special Schaller Sounder® compound, a material blend with Teflon, which drastically reduces string breakage. The Schaller Hannes bridge is ergonomically shaped and has no sharp edges. In addition to improved playing comfort on the heel of the hand, the Teflon-containing material also protects the strings on the contact surfaces with its excellent sliding properties. Compared to other string saddles (made of brass or steel), Schaller Sounder® compound saddles increase sustain by up to 25 %.The sound of your guitar is much more harmonic, characterized by fine trebles and fast response as well as a defined, powerful and even reproduction. The string saddles rest on the body over a large area and are separated from each other due to the design, which results in an audible and noticeable gain in dynamics compared to all other known systems.The pickups can be earthed via the string anchorplate (it holds the individual string saddles by means of intonation screws). For earthing, simply position a stripped, fanned-out stranded wire as an earth cable between the base of the bridge support and the guitar top during assembly. Please note our detailed installation user guide for Hannes bridge. Technical specifications String spacing (E-e): 54 mm String spacing individual: 10.8 mm String radius: adjustable from 9,5“ to 20“ Minimal G/d string height above body: 10.3 mm Maximum height adjustment: 2.5 mm Maximum string gauge: 0.064 Weight: 98 gram, 156g with accessories Please note: not suitabel for left-handed models!  Scope of supply 1 x string mounting bar (anchor plate) with 6 x Hannes addles 2 x wood screws LK 2.2 x 9.5 2 x mounting screws SK M5 x 50 (if necessary, shorten yourself) 2 x screw sockets: 13.0 mm 3 x allen keys: 2.0, 2.5 and 3.0 mm The bridge is regularly equipped with height adjustment screws with a length of 5.95 mm. Optionally (not included) we offer a set of Hannes 6 height adjustment screws in 7.85 mm length. These allows the string action to be raised by 2 mm. See also further replacement kits for bridges.(Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)

Signum - iconic bridges With the Schaller Signum bridge, we have designed an ergonomically shaped and lockable guitar bridge that ensures greater playing pleasure. The newly developed locking studs secure the bridge from falling down and are rigidly connected to the bolt: For more sustain! Concept and features Installing Intonation Designed to boost your guitar`s sound, playability and looks. Special design locking studs for tight connection and perfect sound coupling. Uncoated string saddles milled from solid Pure Sound brass with excellent sound transmission. Perfect natural resonance resulting in rich dynamics, sustain and overtones. Top surface elements designed for unparalleled playing comfort. Vast intonation space of 9 mm string saddle travel. Allen screws of different lengths (6 mm / 10 mm) to expand the intonation range. Angled and straight mounting are possible. Meticulously designed break and pressure angles. Optimized string-through-bridge routing for effortless restringing. Rectangular ballend retainer holes to prevent untwisting ballends. Elegance and versatility for all guitar styles. Suitable for curved and flat guitar tops alike. Innovative die-cast zinc bridge construction for legendary vintage tone With its sleek design and unique construction details Signums G/D string height above body can be adjusted as low as 13.20 mm (0.520). Advantages of Pure Sound brass Due to its softness, brass is an ideal saddle material and offers sufficient resistance to the strings.  Uncoated brass saddles (plain or notched) can be easily customized by the guitar maker with a saddle file for smooth transitions. Form-fit support of the components in conjunction with improved string contact thus supports playability, intonation and sustain.Technical specifications Bridge bolt spacing: 81.8 mm/3,220″  String spacing (E/e): 52.5 mm/2,067″ String spacing saddles: 10.5 mm/0,413″ Bridge radius: 12″ , for fretboards 10-14″ Weight: 90 g (206 g with accessories) Suitable for left-handers: yes Scope of supply 1 x Signum Locking key ergonomically shaped for trouble-free locking (only for Locking Version) 2 pairs of different lengths Allen screws (6 mm/10 mm) for flawless visual appearance (6 mm pre-installed) 1 x allen key for allen screwsWith accessories according to your selection in the configurator:1 pair of studs and inserts non-locking (M8, metric) 1 pair of studs and inserts locking (M8, metric) 1 pair of studs locking (5/16"24 UNF) 1 pair of studs non-locking (5/16" 24 UNF)Optional accessories can be found here: replacement kits for bridges.Operating Instructions    (Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)

GTM – high-quality Tune-O-Matic bridge  Compatible with post spacings from 74.0 - 74.5 mm Features special retainer springs to prevent bridge rattle or string buzz Uncoated and unnotched string saddles milled from solid Pure Sound brass with excellent sound transmission. Unnotched string saddles allow individual string spacing (distance between two neighboring strings) and string action (strings distance to fretboard) The exact slant angle for installation of a Tune-O-Matic bridge should be determined by the luthier according to technical aspects of the scale lenght and the string gauge of the respective instrument. (*Les Paul is a protected trademark owned by Gibson Brands, Inc.) Advantages of Pure Sound brass Due to its softness, brass is an ideal saddle material and offers sufficient resistance to the strings.  Uncoated brass saddles (plain or notched) can be easily customized by the guitar maker with a saddle file for smooth transitions. Form-fit support of the components in conjunction with improved string contact thus supports playability, intonation and sustain. Please note the selection options in the product configurator above: 1. Choose surface color 2. Model: non-reverse: intonations screws point to the pickups reverse: intonations screws point to the tailpiece 3. Accessories: 1 pair of GTM studs and inserts M5 (metric) 1 pair of GTM studs M8 (metric) 1 pair of GTM nails (threaded rods) and height-adjustment wheels M4 (metric) Scope of supply: You will receive the product in the selection you have made with accessories.See also further replacement kits for bridges. Technical specifications Distance height adjustment screws: 74 - 74.5 mm String spacing (E-e): 52.5 mm String radius: 12″ - 14″, depending on the notching of the string saddles, more inside (12″) or outside (14″), in extreme cases still playable for fretboards from 10″ - 16″; minimal G/d string height above body 13.7 mm, Weight: 53 gram, 70 gram with accessories) Special feature: also suitable for lefthanded models(Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)

3D-6: patented flatmount bridge for guitars With adjustable height, intonation and string spacing: roller bridge saddles. The roller bridge saddles reliably minimize string breakage while maintaining intonation and tuning stability. 3-dimensional adjustment of string height, intonation and string spacing (with roller bridge saddles). The individual string intonation is set by adjusting the string saddles. String rests with shafts and rollers made of solid and uncoated Pure Sound brass for excellent sound transmission. Heavy and precise construction for extra long sustain. Variable overall height with 3mm spacer. The strings lie on low-friction roller saddles which prevent the strings from breaking. Comes with 2 different type saddle rollers to suit tone and string bending requirements: wide flat rollers for low strings and tight U-shaped for high strings. This means the string spacing can be adjusted flexibly. Advantages of Pure Sound brass Due to its softness, brass is an ideal saddle material and offers sufficient resistance to the strings.  Uncoated brass saddles (plain or notched) can be easily customized by the guitar maker with a saddle file for smooth transitions. Form-fit support of the components in conjunction with improved string contact thus supports playability, intonation and sustain. Technical specifications String spacing (E-e): 50 - 56.5 mm Sring spacing individual (neighboring strings): 10 - 11.3 mm String radius: adjustable from 7″ to 20″ inch Minimal G/d string height above body: 11.1 mm Height adjustment: 3.5 mm Maximum string gauge: 0.052 Weight: 152 gram, 198 gram with accessories Please note: not suitable for left-handed models! Height adjustment screw: grub screw with conical point with hexagon socket M2.5 x 6 Scope of supplyYou will receive the product with the accessories you selected in the configurator.1 x 3D-6 bridge 3 x mounting screws M4.2 x 25 mmwith or without 3 mm underlay (see configurator) Please note the choice of options in the product configurator above: 1.) Choose surface color 2.) Accessories with 3 mm underlay without 3 mm underlay About buzzing on roller bridges: The string spacing can be adjusted very precisely by the rollers. The roller moves at a minimum distance between the roller and the roller thread in accordance with the standardized manufacturing tolerance. It is therefore recommended that once the string spacing of the roller has been successfully adjusted, it should be secured with thread locking adhesive for threaded connections (e.g. Loctite 242 or similar). Advantages of threadlocker adhesiveThe hardened adhesive between the close-fitting metal surfaces of the roller prevents unintentional displacement of the rollers andvibrations caused by the string vibrations.In addition, the adhesive can usually be removed to allow the rollers to be moved again. Always observe the adhesive manufacturer's technical data sheet!(Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)

Schaller Oyster D/S – balanced new sound in a modern design The Schaller Oyster has been a classic contact pickup for decades. With its compact size and low weight, it can be easily mounted on guitar tops for spontaneous gigs or permanently installed in the body of acoustic instruments.The new oyster has become a little bit slimmer and convinces thanks to the new piezo technology with an even more balanced sound. This makes it the perfect pickup system for guitars, basses, ukuleles, mandolins and other acoustic stringed instruments.The Oyster is available in different cable lengths with a 6.35 mm (1/4″) jack socket or plug, as a single or double pickup, classic nickel-plated or in pure sound brass. Unique features of the Schaller Oyster Piezo-Pickup Piezo contact pickup: A sensor pickup for retrofitting or easy installation on and in an acoustic stringed instrument. New balanced piezo sound design, with lifelike and powerful reproduction of the instrument sound, without active circuitry or preamplifiers.  The excellent sound result is achieved by a perfect interaction of membrane and piezo element. Technical details Oyster shell material: brass Weight: 12 grams per Oyster shell Available finishes: pure brass or nickel Passive circuitry: no power supply like battery needed Resonance frequency: 6.0kHz ±0.5kHz Max. Resistance (Zr): 500 Ω Capacitance: 14000 nF ± 30% nF Special feature: also suitable for percussive playing Scope of supply Oyster Model D/S: with 2 x Oyster shells as shown in the PDF 8 x adhesive foils Schaller Oyster in three different versions The Schaller Oyster is available in three different versions: as single (S/S or S/P) or double (D/S), whereby the two Oyster piezos of the D/S allow a wider frequency spectrum. It can be easily mounted with the included jack sockets or plugs of 6.35 mm (1/4″) diameter. Oyster D/S (double/socket) 2 x Oyster piezos for internal mounting cable length 45 cm With high-quality 1/4″ (6.35 mm) jack socket incl. strain relief, screw grommet and strap mount See also the other Oyster models: Oyster S/S (single/socket) 1 x Oyster piezo for internal mounting cable length 45 cm with high-quality 1/4″ (6.35 mm) jack socket incl. strain relief, screw grommet and strap receptacle Oyster S/P (single/plug) 1 x Oyster piezo external attachment to instrument top Cable length: 320 cm  High quality 1/4″ (6.35 mm) jack plug Mounting instructions The Oyster shells can be mounted using the included double-sided adhesive pads. Therefore, for proper mounting/dismounting of the Oyster shell using foil in the body, and for mounting the end jack in the frame, we always recommend consulting your local guitar builder or dealer for advice. These options are often used in practice Under the strings, in front of the bridge, between the 2nd and 3rd treble strings. Directly next to the bridge on the treble side Behind the bridge, towards the end of the body in the area of the treble strings On the D/S model with two Oyster shells, the second likes to be placed in the bass string area. It is also suitable for other positions: I+I: both shells inside the body I+O: one inside the body, one outside on the top O+O: both outside on the top Even the smallest changes in position lead to different sound results. The Oyster shell should always be fixed in an easily accessible place with the foil already glued on.  About piezo systems for stringed acoustic musical instruments Piezo pickups are in principle suitable for all types of musical instruments. The sound depends very much on the mounting position. Patience is required in finding the right mounting position for a piezo pickup. Each player prefers his or her own "sweet spot". Even the slightest change in the piezo's position on the top or in the body will produce different sound results in bass, midrange, treble and volume levels.  Piezo transducers are not powerful signal sources due to their physical design, so they are usually sold in guitars with integrated preamps (preamp with equalizer) to compensate the signal loss due to long cable runs and to shape the sound. An additional preamp for acoustic instruments as a floor pedal or a powerful acoustic amplifier, are therefore preferable for optimal signal reproduction (Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)

Schaller Vintage Tremolo equipped with block style KTS saddles (block style, PR-18)Advantages of titanium saddles Titanium - very light, durable, resistant to corrosion and chemical agents, and with a very sweet yet detailed, highly musical tone Expect longer sustain, clearer note separation, improved string-to-string definition and touch sensitivity, more stable tuning and zero corrosion. Titanium saddles provide the brightest tone, with the most response and clarity. The low internal damping factor of Titanium, in combination with string vibration, results in improved response and dynamic touch sensitivity. The synergetic effect of Titanium`s pure and natural tone provides ultra-clear note separation, and even makes chords sound more defined and full. Our Titanium saddles do not alter the tonal characteristics - instead they bring out the player`s nuances by more clearly defining and transmitting the dynamics of string vibration and wood resonation. It is also a perfect replacement for Fender® Stratocaster®* tremolos.  Tremolo mounting is done with special mounting studs and threaded metric inserts. These are provided with a fine thread. Optionally, we also offer height adjustable wood screws for direct mounting into the wooden body. In this case, the insert is not required. (* Fender® and Stratocaster®* are registered trademarks of Fender Musical Instruments Corporation.)  Technical specifications Distance height adjustment screws: 74.3 mm Size press-in bushing: 10 mm String spacing: 10.8mm String spacing (E-e): 54 mm Slideway intonation: 12.0 mm Weight: 327 g with block length 37 mm Scope of supply 1 x tremolo claw complete with 2 mounting screws 4.2 x 45 mm and 3 tremolo springs 2 x mounting studs with 2 threaded bushings 1 x Tremoloblock according to selected length (Schaller GmbH accepts no responsibility or liability for the correctness, accuracy and completeness of the following technical drawing/s.)